MPAX-230 AirCom Pneumatic

Digital, programmable display for dual range input 0 to 10 V DC
or 0/4 to 20 mA with 24 V DC transmitter power.
Min./max. value memory, 16-point scale for non-linear processes.
Programmable function keys / user inputs. Four setpoint alarm outlets.
Analogue outlet, interface and bus capabilities.

Programming:
data entry by keypad, optionally by serial interface RS232 with
PC software and cable or by RS485

Supply_voltage:
11…36 V DC, max. power consumption 11 W or 85…250 V AC,
max. power consumption 15 VA

Display: 5-pin LCD display 14 mm tall, red numbers,
background lighting

Electrical_connector: terminal strip for area 0.14…1.5 mm²
Input_signal: 0…10 V or 0/4…20 mA
Analogue_output_card: 0/4…20 mA or 0…10 V, freely selectable
Relay_output_card: 2x SPDT 5 A or 4x NOC 3 A, at 24 V DC
Transistor_output_card: 4x NPN, 100 mA or 4x PNP, 30 mA
Sensor_supply: 24 V DC ± 5%, max. 50 mA
Measuring_rate: 20 measurements/s Response time 200 ms
Measurement_memory: and display of min./max. value
Unit_counter: input signal x time
Display_accuracy: 0.12% FS at 0 °C to 50 °C / 32 °F to 122 °F
Certifications: CE-certified, UL-listed
Response_time: 200 ms
Resolution: 16 bit A/D converter

Temperature_range: -20 °C to 50 °C / -4 °F to 122 °F

Protection_class: IP 65 in the front

Housing: dark red, shockproof plastic
The electrical plug-in module can be pulled out rearwards.