We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Type
KHZ-DA-016-0010-O
Part number
0822010511
Description
Kurzhubzylinder, Serie KHZ KHZ-DA-016-0010-O Kolben-Ø16 mm Hub10 mm Wirkprinzipdoppeltwirkend Dämpfungelastische Dämpfung MagnetkolbenKolben ohne Magnet UmgebungsanforderungenIndustriestandard Kolbenstangeeinseitig AbstreiferStandard Industrieabstreifer Druck zur Bestimmung der Kolbenkräfte6,3 bar Kolbenkraft einfahrend95 N Kolbenkraft ausfahrend127 N Umgebungstemperatur min.-25 °C Umgebungstemperatur max.80 °C Betriebsdruck min.1 bar Betriebsdruck max.10 bar AnschlüsseM5 KolbenstangengewindeM5 Aufschlagenergie0.06 J MediumDruckluft Mediumstemperatur min.-25 °C Mediumstemperatur max.80 °C Max. Partikelgröße50 µm Ölgehalt der Druckluft min.0 mg/m³
Stock availability:
5 In stock
If you are inspecting Aventics (brand of Emerson) KHZ-DA-016-0010-O 0822010511, reach FAMAGA, the world's dominant company of factory-made equipment. Our company has functioned for more than ten years - these are years of experience, which are illustrated in the quality of outputs and individual attention to each orderer. We admire everyone, who joined with us - therefore, our regular buyers obtain the most acceptable purchase conditions and discounts on the manufacturing equipment market. At this moment, there are more than 4000 such buyers, and we constantly compose new agreements. More than 750 purchases are terminated per day, because FAMAGA supplies all over the world Germany, United Kingdom, Norway, Cameroon, South Africa, Switzerland, Gambia, Paraguay, Moldova, Peru, Lithuania, Georgia, Libya, Russia, Macedonia, Croatia, Iran, Bhutan, Cape Verde, Brazil, Turkey, Morocco, Bulgaria, Israel, Ecuador, Latvia, South Korea, Afghanistan, Turkmenistan, Syria, Burundi, Eswatini, Argentina, Denmark, Nigeria, Mauritius, Togo, Belize, Tonga, Kyrgyzstan, Greece, Chile, Zimbabwe, Kazakhstan, Austria, Bangladesh, Zambia. A well-developed logistics bond and a partnership network cheer us to conduct our elements anywhere in the earth as soon as possible without compromising product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the field of factory-made equipment.
All goods from FAMAGA are ensured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been shipped, and this number is rising every day. We are glad that clients choose FAMAGA again and again, and we are glad to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To ask a question or make a request, get in touch with us or write to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Other versions can be ordered from AVENTICS sales offices. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Piston | Nitrile rubber |
Front cover | Brass Aluminum |
End cover | Aluminum |
Scraper | Polyurethane |