We are not the manufacturer, authorised distributor or authorised representative of the Hengstler brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Hengstler
Country
USA
Name
462
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are questing Hengstler 462 , contact FAMAGA, the world's prime distributor of streamlined equipment. Our company has progressed for more than ten years - these are years of experience, which are expressed in the quality of products and individual attention to each user. We appreciate everyone, who conspired with us - therefore, our regular clients accept the most favorable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such clients, and we constantly compose new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Jordan, Colombia, Italy, The Bahamas, Dominican Republic, Latvia, Indonesia, North Korea, Senegal, Mozambique, Chile, Mauritius, Cyprus, Yemen, Kyrgyzstan, Russia, Eritrea, Norway, Finland, Mongolia, Afghanistan, Albania, Madagascar, Guatemala, Benin, New Zealand, Serbia, East Timor, Brunei, Belarus, Macedonia, Nepal, Cameroon, The Gambia, Rwanda, Comoros, Qatar, Costa Rica, Bosnia and Herzegovina, Bolivia, Ireland. A advanced logistics series and a partnership network allow us to conduct our goods anywhere in the world as soon as possible without undermining product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the field of industrial equipment.
All outputs from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that customers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To inquire or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Function / Application | Safety relay |
| Product line | HENGSTLER |
| Relay family | 462 |
| Contactset | forcibly guided |
| According EN 50205 | Application type A |
| Ambient temperature [°C] | -25 ... +80 °C |
| Soldering heat resistance [°C] | 260 °C |
| Max. soldering time [s] | 5 s |
| Pins pre-soldered with | Sn 100 |
| Approval |
|
| Standards |
|
| Meets the requirements |
|
| Number of NO contacts | 2 ... 4 |
| Number of NC contacts | 1 ... 3 |
| Number of CO contacts | 0 |
| Size | 1 / 2 |
| Dimensions L x W x H [mm] |
|
| Housing | dustproof (RT II) |
| Shock resistance NO / NC [g] | 10/10 g |
| Puls duration (half sinus) | 16 ms |
| Vibration resistance NO / NC [g] | 10/10 g |
| Frequency range [Hz] | 10 - 55 Hz |
| Operating time NC contact, contact opens [ms] | 17 ms |
| Operating time NO contact, contact closes [ms] | 23 ms |
| Releasing time NO contact, contact opens [ms] | 5 ms |
| Releasing time NC contact, contact closes [ms] | 7 ms |
| Mechanical service life (without load) | 10,000,000 switching cycles |
| Connection type |
|
| Fixing type | Contact: Solder pins |
| Drive system |
|
| Nominal coil voltage [V] |
|
| Nominal coil current [A] | 5 ... 230 V |
| Resistance tolerance [%] | 10 ... 73,700 Ohm |
| Max. switching current [A] |
|
| Continuous current Ith2 at same time over 2 contacts [A] | 10 A |
| Max. switching capacity [VA] | 230/240 V |
| Max. switching capacity [W] | 2000 VA |
| Switching capacity DC-13 at 24 V [Ie in A] | 4 A |
| Contact gap about open contact | 2 A |
| Short-circuit capacity 1000 A / AC 230 V [A] | 100,000 cycles |
| Insulation | 10 A |
| Function / Application | Safety relay |
| Product line | HENGSTLER |
| Relay family | 462 |
| Contactset | forcibly guided |
| According EN 50205 | Application type A |
| Ambient temperature [°C] | -25 ... +80 °C |
| Soldering heat resistance [°C] | 260 °C |
| Max. soldering time [s] | 5 s |
| Pins pre-soldered with | Sn 100 |
| Approval |
|
| Standards |
|
| Meets the requirements |
|
| Number of NO contacts | 2 ... 4 |
| Number of NC contacts | 1 ... 3 |
| Number of CO contacts | 0 |
| Size | 1 / 2 |
| Dimensions L x W x H [mm] |
|
| Housing | dustproof (RT II) |
| Shock resistance NO / NC [g] | 10/10 g |
| Puls duration (half sinus) | 16 ms |
| Vibration resistance NO / NC [g] | 10/10 g |
| Frequency range [Hz] | 10 - 55 Hz |
| Operating time NC contact, contact opens [ms] | 17 ms |
| Operating time NO contact, contact closes [ms] | 23 ms |
| Releasing time NO contact, contact opens [ms] | 5 ms |
| Releasing time NC contact, contact closes [ms] | 7 ms |
| Mechanical service life (without load) | 10,000,000 switching cycles |
| Connection type |
|
| Fixing type | Contact: Solder pins |
| Drive system |
|
| Nominal coil voltage [V] |
|
| Nominal coil current [A] | 5 ... 230 V |
| Resistance tolerance [%] | 10 ... 73,700 Ohm |
| Max. switching current [A] |
|
| Continuous current Ith2 at same time over 2 contacts [A] | 10 A |
| Max. switching capacity [VA] | 230/240 V |
| Max. switching capacity [W] | 2000 VA |
| Switching capacity DC-13 at 24 V [Ie in A] | 4 A |
| Contact gap about open contact | 2 A |
| Short-circuit capacity 1000 A / AC 230 V [A] | 100,000 cycles |
| Insulation | 10 A |
