We are not the manufacturer, authorised distributor or authorised representative of the HILGE (brand of GEA) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

HILGE (brand of GEA)

Selling any product from the catalog HILGE (brand of GEA) at good prices

Vendor code
Description
Price
On request
Get a price
On request
Get a price
GEA Hilge Hygia K I KYS 40/40/4/2 96809180 FÖRDERMEDIUM & LEISTUNG: MASSNOR: Metrisch PRODUKT KUNDE: Wasser VOLUMENSTROM PRODUKT [M³/H]: 15,00 FÖRDERHÖHE PRODUKT [M]: 44,00 TEMPERATUR PRODUKT [°C]: 20,0 VISKOSITÄT PRODUKT [MPAS]: 1,0 DICHTE PRODUKT [KG/M³]: 1.000,0 KONZENTRATION [%]: 0,0 PARTIKELGRÖSSE [MM: 0,0 ABRASIV: Nein MEDIUM PRÜFSTAND: Wasser 20 °C FÖRDERMENGE AM PRÜFSTAND [M³/H]: 15,00 FÖRDERHÖHE AM PRÜFSTAND [M]: 44,00 FREQUENZ AM PRÜFSTAND [HZ]: 50 PUMPE: BAUGRÖSSE DER PUMP: GEA Hilge HYGIA I BAUFORM: K EINBAULAGE DER PUMPE: Horizontal STUFENZAHL: 1 EHEDG KONFORMITÄT: Nein 3A KONFORMITÄT: Nein GEHÄUSEBAUART HYGIA: Gehäuse mit Klemmring - KLM GEHÄUSEOPTIONEN: Standardgehäuse GEHÄUSEDECKELOPTIONEN: Standard ENTLEERUNG: Nein MOTORNORM (MECHANISCH): IEC LACKIERUNG FARBE: Tiefschwarz - RAL 9005 PUMPENNENNDRUCK: PN 10 OBERFLÄCHENRAUHEIT: Ra <= 3,2 μm (Ra <= 125 μin) SCHWEISSNAHTBEHANDLUN: Ohne Bearbeitung WERKSTOFF PRODUKTBERÜHRTE TEILE: Cr-Ni- Mo Stahl FERRITGEHALT: Ohne Einschränkung OBERFLÄCHENBEHANDLUNG: Produktberührte Schweißbauteil ANSCHLUSS & LAUFRAD: ROHRNORM: DIN EN 10357 ANSCHLUSSART: Gewinde ANSCHLUSSNORM: DIN 11851, Gewindestutzen NENNWEITE SAUGSEITE: DN 40 NENNWEITE DRUCKSEITE: DN 40 DRUCKSTUTZENLAGE: 12:00 (Blick von Pumpenseite) GEGENANSCHLUSS: Ohne Gegenanschlüsse LAUFRADTYP: Halboffen (gegossen) LAUFRADGRÖSS: 185x9 LAUFRADDURCHMESSER (1. STUFE): 185 DICHTUNG: ELASTOMER MATERIAL, PUMPE: EPDM ELASTOMERZERTIFIKATE, PUMPE: FDA GLRD AUSFÜHRUNG: Einfachwirkend GLRD FEDER (P): Offene Feder GLRD SITZ (P): 001-Sitz WERKSTOFF STATISCHER RING (P): Hartkohle WERKSTOFF ROTIERENDER RING (P): Edelstahl WERKSTOFF GLRD ELASTOMER (P): EPDM ZULASSUNG ELASTOMER (P): FDA GLRD-AUSFÜHRUNG GEGENRING (P): - FEDERDREHRICHTUNG (P): Rechtsdrehend GLRD OBERFLÄCHENRAUHEIT (P): Ra <= 1,6 μm (Ra <= 62,5 μin) GLRD FERRITGEHALT (P): Ohne Einschränkung DICHTUNGSGEHÄUSE OPTIONEN: Standard AUSFÜHRUNG: VERKLEIDUNGSHAUBE AUSFÜHRUNG: Edelstahlhaube PUMPENAUFSTELLUNG: Auf Kalottenträger PUMPENAUFSTELLUNG (ZUSATZ): Kompensationshöhe h1=200mm MATERIAL BAUFORMTEILE: Edelstahl MOTOR: MOTOR BAUART: Drehstrommotor MOTOR LÄNDERVORSCHRIFT: Europa MOTORFREQUENZ: 50 Hz MOTORLEISTUNG: 4 kW MOTORPOLZAHL: 2-polig MOTORPHASEN: 3 MOTORSPANNUNG: 400 VD / 690 VY MOTORSPANNUNG GESCHALTET: 3x 400 V MOTOREFFIZIENZKLASSE: IE3 MOTORSCHUTZKLASSE: IP55 MOTORSCHUTZ: 3x Kaltleiter MOTORBAUFORM: IM B35 MOTORKLEMMKASTENLAGE: Oben MOTOR GEHÄUSEWERKSTOFF: nicht definiert MOTORBAUGRÖSS: 112M MOTORLIEFERANT: Unsere Wahl
7039.2 €
GEA Hilge DURIETTA I BYY 25/25/0,25/4 FÖRDERMEDIUM & LEISTUNG: MASSNOR: Metrisch PRODUKT KUNDE: Würze VOLUMENSTROM PRODUKT [M³/H]: 5,00 FÖRDERHÖHE PRODUKT [M]: 3,00 ZUSÄTZLICHE BETRIEBSPUNKTE: Nein TEMPERATUR PRODUKT [°C]: 20,0 VISKOSITÄT PRODUKT [MPAS]: 1,0 DICHTE PRODUKT [KG/M³]: 1.000,0 KONZENTRATION [%]: 0,0 PARTIKELGRÖSSE [MM: 0,0 ABRASIV: Nein MEDIUM PRÜFSTAND: Wasser 20 °C FÖRDERMENGE AM PRÜFSTAND [M³/H]: 5,00 FÖRDERHÖHE AM PRÜFSTAND [M]: 3,00 FREQUENZ AM PRÜFSTAND [HZ]: 50 TYPENSCHILD: GEA Hilge VARIANTE TYPENSCHILD: Eurasien PUMPE: BAUGRÖSSE DER PUMP: GEA Hilge DURIETTA I BAUFORM: Bloc EINBAULAGE DER PUMPE: Horizontal STUFENZAHL: 1 EHEDG KONFORMITÄT: Nein 3A KONFORMITÄT: Nein MOTORNORM (MECHANISCH): IEC LACKIERUNG FARBE: Tiefschwarz - RAL 9005 PUMPENNENNDRUCK: Ohne Spezifikation OBERFLÄCHENRAUHEIT: Ra <= 3,2 μ m (Ra <= 125 μ i n ) SCHWEISSNAHTBEHANDLUN: Ohne Bearbeitung WERKSTOFF PRODUKTBERÜHRTE TEILE: Cr-Ni- Mo Stahl FERRITGEHALT: Ohne Einschränkung OBERFLÄCHENBEHANDLUNG: Produktberührte Schweißbauteil ANSCHLUSS & LAUFRAD: ROHRNORM: DIN EN 10357 ANSCHLUSSART: Gewinde ANSCHLUSSNORM: DIN 11851, Gewindestutzen NENNWEITE SAUGSEITE: DN 25 NENNWEITE DRUCKSEITE: DN 25 DRUCKSTUTZENLAGE: 12:00 (Blick von Pumpenseite) GEGENANSCHLUSS: Ohne Gegenanschlüsse LAUFRADTYP: Halboffen (geschweißt) LAUFRADGRÖSS: 130x6 LAUFRADDURCHMESSER (1. STUFE): 130 DICHTUNG: ELASTOMER MATERIAL, PUMPE: EPDM ELASTOMERZERTIFIKATE, PUMPE: FDA GLRD AUSFÜHRUNG: Einfachwirkend GLRD FEDER (P): Offene Feder GLRD SITZ (P): 001-Sitz WERKSTOFF STATISCHER RING (P): SiC (massiv) WERKSTOFF ROTIERENDER RING (P): SiC (geschrumpft) WERKSTOFF GLRD ELASTOMER (P): EPDM ZULASSUNG ELASTOMER (P): FDA GLRD-AUSFÜHRUNG GEGENRING (P): - FEDERDREHRICHTUNG (P): Rechtsdrehend GLRD OBERFLÄCHENRAUHEIT (P): Ra <= 1,6 μ m (Ra <= 62,5 μ i n ) GLRD FERRITGEHALT (P): Ohne Einschränkung AUSFÜHRUNG: VERKLEIDUNGSHAUBE AUSFÜHRUNG: Ohne Haube PUMPENAUFSTELLUNG: Auf Motorfuß MATERIAL BAUFORMTEILE: Grauguss MOTOR: MOTOR BAUART: Drehstrommotor MOTOR LÄNDERVORSCHRIFT: Europa MOTORFREQUENZ: 50 Hz MOTORLEISTUNG: 0,25 kW MOTORPOLZAHL: 4-polig MOTORPHASEN: 3 MOTORSPANNUNG: 230 VD / 400 VY MOTORSPANNUNG GESCHALTET: 3x 400 V MOTOREFFIZIENZKLASSE: IE3 MOTORSCHUTZKLASSE: IP55 MOTORSCHUTZ: 3x Kaltleiter MOTORBAUFORM: IM B35 MOTORKLEMMKASTENLAGE: Oben MOTOR GEHÄUSEWERKSTOFF: Aluminium MOTORBAUGRÖSS: 80 MOTORLIEFERANT: Unsere Wahl
3366.67 €
End suction stainless steel pump, Cr-Ni-Mo steel Description: GEA Hilge HYGIA II Adapta ADS 65/65/15/2 alternativ nachfolgend zu 98866242 Execution: Casing with clamp ring - KLM Hygienic Standard Wet end parts in Cr-Ni-Mo-Steel (AISI 316 series) Design: horizontal, single stage pump in Adapta-Bloc version with bearing bracket, with standard motor, with stainless steel shroud for motor Stainless steel shroud with GEA company logo Installation: on combi foot with machine pads Coupling: N-EUPEX B Painting colour: RAL 9005 Performance: Q = 40m3/H, H = 58 m Fls Medium: Bier / CIP Impeller(s): semi-open impeller 2309 Ø 220 Shaft seal: single mechanical seal hard carbon / stainless steel / EPDM Elastomers: EPDM Connections: Diameter DNE 65 Diameter DNA 65 Connection DNE: DIN 11851 Threaded Male Connection DNA: DIN 11851 Threaded Male Position DNE/DNA: axial/tangential top, 12:00 o'clock Materials: Casing/casing parts: AISI 316 series, Ra ? 3.2 μm Impeller(s): AISI 316L - 1.4404 - Ra ? 3.2 μm Shaft: 1.4571 - AISI 316TI, Ra ? 1.6 μm (product contacted part) Shroud: AISI 304 - 1.4301 Combi foot: AISI 304 - 1.4308 Bearing bracket/Lantern: cast iron - GG 20 Motor: three-phase motor with PTC thermistor Size: 160M Vendor: our choice Performance: 15 Speed: 2900 rpm Voltage: 400VD/690VY (± 5%) Frequency: 50 Hz Protection class: IP55 Efficiency class: IE3 Iso-class.: F Design: IM B35 - flange motor on motor foot Terminal box position: on top, 12:00 o'clock Ex protection: w/o Rated voltage: 400 V Test bed acceptance: Performance acceptance test following ISO 9906: 2012, Grade 2B
On request
Get a price
On request
Get a price
On request
Get a price
Neupumpe End suction stainless steel pump, Cr-Ni-Mo steel Description: GEA Hilge CONTRA I /4 BVY 50/40/3/2 as pre-delivery 98997276 Execution: Sterile Standard Wet end parts in AISI 316L (1.4404/1.4435), manually- and electropolished All liquid touched elastomere with USP Class VI conformity Design: vertical, multi stage pump in Bloc version with motor Installation: pump w/o foot/stand, pump will be installed by customer Painting colour: RAL 5010 Performance: Q = 8,2 m³/h, H = 52 m Fls Medium: Water for Injection Viscosity: 1 mPas, Density: 1000 kg/m³ Temperature: 90 °C, Concentration: Impeller(s): open sterile-impeller, forged and milled execution 1306 Ø 130KN- 130LN-130LN-130LN Shaft seal: single mechanical seal with seal cover and flowbreaker Sterile seal, encapsulated spring - Ra ? 0.8 μm Silicon carbide / Silicon carbide / EPDM - FDA, USP Class VI and 3A Sanitary conform Execution: duo-directional, stationary ring with lubricating grooves and v-shaped gap Elastomers: EPDM with FDA and USP Class VI Connections: Diameter DNE 50 Diameter DNA 40 Connection DNE: Clamp Liner DIN 32676 for DIN pipes (DIN 11866 - A) Connection DNA: Clamp Liner DIN 32676 for DIN pipes (DIN 11866 - A) Position DNE/DNA: axial/tangential top, 12:00 o'clock Materials: Casing/casing parts: AISI 316L - 1.4404/1.4435, Ra ? 0.8 μm (welding seams smoothly grinded) Impeller(s): AISI 316L - 1.4435 - Ra ? 0.8 μm Shaft: 1.4571 - AISI 316TI, Ra ? 1.6 μm (not a product contacted part) Bearing bracket/Lantern: cast iron - GG 20 Motor: three-phase motor with PTC thermistor Size: 100L Vendor: Kaiser Performance: 3 Speed: 2900 rpm Voltage: 400VD/690VY (± 5%) Frequency: 50 Hz Protection class: IP55 Efficiency class: IE3 Iso-class.: F Design: IM B5 - flange motor Terminal box position: factory mounted position: top, 12:00 o'clock Ex protection: w/o Rated voltage: 400 V Test bed acceptance: Performance acceptance test following ISO 9906: 2012, Grade 2B Documents: Pump test report, Operating manual, Declaration of CE conformity
On request
Get a price

The site contains only a small part of the catalog items HILGE (brand of GEA).

If you have not found the article you need, send a request to the mail [email protected] and we will definitely send you a commercial proposal.

About the manufacturer

Affordable solutions for all your application necessities - this single sentence can identify the crucial principle of FAMAGA. We are selling high-quality industrial machinery and spare parts manufactured by HILGE (brand of GEA). We are thankful of our high choosiness,selectiveness of exceptional brands on the industrial fair, which means that we can supply any proportion, any heaviness and any size of industrial products.

We are a team of professionals, who tackle over 2000 purchasing lists daily and always bring suitable solutions for your applications. We provide everything you need for the expansion of your industry. Due to our advanced logistics link, we distribute your desirable material of HILGE (brand of GEA) in the quickest possible time at reasonable prices. If you think that your demand is overweight, we have the ability to discover enough zone for it. Therefore, we provide distribution of any scope, any capacity and any size industrial equipment and spare parts made by HILGE (brand of GEA).

Constantly, all goods are checked before delivery. Thanks to the vast portfolio of HILGE (brand of GEA) we are always ready to fulfill crucial requirements of our consumers in order to hit customer satisfaction. We guarantee the exceptional supply network of industrial instruments and spare parts of HILGE (brand of GEA).

You conduct an inquiry and we offer a solution.

If you loss anything in your industry, do not wobble to get in touch with us to