Specifications IB080173
Inductive proximity switches are sensors that operate without contact. They detect all kinds of conductive metals, regardless of whether they are moving or not. The achievable switching distance of the devices depends on the material of the object and its dimensions. Vibration resistant sensors can be approached from the side or from the front. Inductive proximity switches are used for presence query (eg goods holder), positioning (eg oven lids), counting (eg nuts/bolts), speed query ( eg on gearwheels), in conveying systems (eg hose infeed) or distance measurements (eg push-in monitoring) of metal objects.
Features IB080173
Electrical data
Switching distance: 2mm
Standard measuring plate: 8x8x1
Switching output version: PNP
Switching function execution: NO contact
Voltage drop: 2V
Number of poles: 3
No-load current: 15mA
Correction factor (St37): 1
Correction factor (Cu): 0.2
Relative hysteresis: 15%
With reverse polarity protection: Yes
Relative repeatability: 10%
Short-circuit proof: Yes
Electrical connection version: M8 connector
Display:
Switching frequency: 1,000Hz
Operating voltage (CC): 10 - 30V
Correction factor (VA): 0.7
Correction factor (Ms): 0.4
Correction factor (Alu) : 0.3
Rated switching current: 200mA
Mechanical data
Ambient temperature: -25 - 70°C
Metric thread size: 8
Length of the sensor: 50mm
Alignment of cable entry: axial
Cable passage: axial
Degree of protection (IP): IP67
Housing material: Stainless steel 1.4305
Thread length: 35mm
Thread pitch : 1mm
Maximum tightening torque: 10Nm
Design: Cylinder, thread
Mechanical mounting condition for sensor: flush
Sensor active surface material: PBT
