We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Keyence
Country
Japan
Name
SZ-16V
Category
Industrial Safety
Type
Mounting bracket
Description
Sicherheits-Laserscanner - Multifunktions Typ 16 Bänke
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
| Model | SZ-16V | ||
| Type | Multi-zone sets (banks) type | ||
| Detection capability | Minimum detectable object size | Diameter 30 mm, 40 mm, 50 mm, 70 mm, 150 mm (depends on the setting) Reflectance 1.8% min., Speed 1.6 m/s max. | |
| Detectable angle | 270° (-45° to 225°) | ||
| Response time (ON to OFF) | General scan cycle (Scan cycle A) | 60 ms (2 scanning) to 480 ms (16 scanning) | |
| Specific scan cycle (Scan cycle B) | 66 ms (2 scanning) to 528 ms (16 scanning) | ||
| Response time (OFF to ON) | General scan cycle (Scan cycle A) | Response time of ON to OFF + 125 ms | |
| Specific scan cycle (Scan cycle B) | |||
| Max. protection zone | Minimum detectable object size: 70 mm /150 mm | 4.2 m (-5° to 185°), 2.8 m (-45° to -5°, 185° to 225°) | |
| Minimum detectable object size: 50 mm | 3.0 m (-5° to 185°), 2.0 m (-45° to -5°, 185° to 225°) | ||
| Minimum detectable object size: 40 mm | 2.4 m (-5° to 185°), 1.6 m (-45° to -5°, 185° to 225°) | ||
| Minimum detectable object size: 30 mm | 1.8 m (-5° to 185°), 1.2 m (-45° to -5°, 185° to 225°) | ||
| Max. warning zone (non safety related) | Minimum detectable object size: 70 mm /150 mm | 10.0 m (-5° to 185°), 7.0 m (-45° to -5°, 185° to 225°)*1 | |
| Minimum detectable object size: 50 mm | 7.5 m (-5° to 185°), 5.0 m (-45° to -5°, 185° to 225°)*1 | ||
| Minimum detectable object size: 40 mm | 6.0 m (-5° to 185°), 4.0 m (-45° to -5°, 185° to 225°)*1 | ||
| Minimum detectable object size: 30 mm | 4.5 m (-5° to 185°), 3.0 m (-45° to -5°, 185° to 225°)*1 | ||
| Additional safety distance | 100 mm*2 | ||
| Light source | Type, wavelength | Infrared laser diode, 905 nm | |
| Laser class | Class 1 IEC / EN 60825-1: 2007 Class 1 CFR 21 1040.10, 1040.11 (Laser Notice No.50) Class 1 JIS C6802: 2005 | ||
| OSSD output | Output | PNP or NPN (Selectable according to the connector cable) 2 outputs | |
| Max. load current | 500 mA*3 | ||
| Residual voltage (during ON) | Max. 2.5 V (with a cable length of 5 m) | ||
| OFF-state voltage | Max. 2.0 V (with a cable length of 5 m) | ||
| Leakage current | Max. 1 mA*4 | ||
| Max. capacitive load | 2.2 µF (with a load resistance of 100 ?) | ||
| Load wiring resistance | Max. 2.5 ?*5 | ||
| Input (safety-related) | Input resistance | 4.4 k? (for Input 1 and 3 to 10) 2.2 k? (for Input 2) | |
| Nonsafety-relatedoutput (AUX output) | Output | PNP/NPN totem pole output 4 outputs | |
| Max. load current | 50 mA | ||
| Residual voltage (during ON) | Max. 2.5 V (with a cable length of 5 m) | ||
| Cable length | 30 m or less*6 | ||
| Approved standards | EMC | EMS | IEC61496-1, EN61496-1, UL 61496-1 |
| EMI | EN55011 Class A, FCC Part15B Class A | ||
| Safety | IEC61496-1, EN61496-1, UL 61496-1 (Type 3 ESPE) IEC61496-3, EN61496-3 (Type 3 AOPDDR) IEC61508, EN61508, IEC62061, EN62061 (SIL2) EN ISO13849-1:2015 (PL d, Category 3) UL508, UL1998 | ||
| Rating | Power voltage | When using a converter power supply: 24 VDC ±10 %, Ripple (P-P) 10 % or less When using a battery: 24 VDC +20 % /-30 % | |
| Power consumption | Max. 10.5 W (without load) Max. 43 W (with load) | ||
| Environmental resistance | Enclosure rating | IP65 (IEC60529)*7 | |
| Ambient light | Incandescent lamp: 1,500 lux or less*8 | ||
| Operating ambient temperature | -10 to +50 °C (No freezing) | ||
| Storage temperature | -25 to +60 °C (No freezing) | ||
| Operating relative humidity | 35 to 85 % RH (No condensation) | ||
| Storage relative humidity | 35 to 95 % RH | ||
| Vibration resistance | 10 to 55 Hz, Double amplitude 0.7 mm, 20 sweeps in each of the X, Y, and Z directions | ||
| Shock resistance | 100 m/s2 (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions | ||
| Material | Main unit case | Aluminum die casting, SPHC (Bottom) | |
| Window | Polycarbonate | ||
| Weight | Approx. 1.6 kg | ||
| *1 20% or more reflectance is necessary for the minimum detectable object in the warning zone. *2 If there is a high reflective background within 1.5 m from the boundary of the protection zone, 200 mm must be added as supplementary necessary distance to the protection zone in case of calculation of the minimum safety distance. *3 For the load current calculation of the OSSD output and the AUX output, make sure it is 1.5 A or less when using converter power supply (or 1.0 A or less when the cable length is 25 m or more), and 1.0 A or less when using a battery (or 0.5 A or less when the cable length is 5 m or more). *4 This also takes into account the situations when power is either off or disconnected. *5 The wiring resistance between the OSSD output and the connected equipment (excluding the resistance of the cable) must be 2.5 ? or less to ensure operation. However, it must be 1.0 ? or less if the load current is 300 mA or more. *6 It must be 10 m or less if the power is supplied by the battery. *7 When the setting cover is open, or the connector cable is not connected, the IP65 certification cannot be met. *8 The SZ should not be installed so as to have light interference within ±5° to the detection plane. |
