We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Keyence
Country
Japan
Name
LK-G3001
Type
Mounting bracket
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing Keyence LK-G3001 , contact FAMAGA, the world's key producer of factory-made equipment. Our company has lasted for more than ten years - these are ages of experience, which are expressed in the quality of products and special attention to each consumer. We appreciate everyone, who worked with us - therefore, our regular buyers obtain the most favorable purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such buyers, and we constantly sign new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Iran, Lebanon, Sri Lanka, Saudi Arabia, Cuba, Moldova, Morocco, Latvia, Monaco, Malaysia, Nicaragua, South Sudan, Cameroon, Jamaica, Zambia, Belarus, Togo, Finland, Luxembourg, Croatia, Suriname, Eswatini, Peru, Tanzania, Brunei, New Zealand, Egypt, El Salvador, Tajikistan, Seychelles, Jordan, East Timor, Montenegro, Benin, The Gambia, Samoa, Argentina, Qatar, Iceland, Zimbabwe, Djibouti, Kazakhstan. A well-elaborated logistics bond and a partnership network guide us to send our items anywhere in the world on-time without discrediting product quality.
A specific source of honor for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the field of industrial equipment.
All goods from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that consumers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To ask a question or place an order, call us by phone or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Model | LK-G3001*1 | |
| Type | Separate monitor model*2 | |
| Head compatibility | All LK-G sensor heads are compatible | |
| Connectable number of heads | Maximum of 2 units | |
| Display | Minimum display unit | 0.01 µm |
| Display range | ±9,999.99 mm to ±9,999.99 µm (Selectable from six levels) | |
| Display cycle | 10 times/sec. | |
| Terminal block | Analogue voltage output | ±10 V x 2 outputs, output impedance: 100 ? |
| Analogue current output | 4 to 20 mA x 2 outputs, maximum load resistance: 350 ? | |
| Timing input | For OUT1, non-voltage input | |
| Reset input | ||
| Auto-zero input | ||
| Laser remote interlock input | Non-voltage input | |
| Comparator output | For OUT1, NPN open-collector output | |
| Alarm output | For OUT1, NPN open-collector output (N.C.) | |
| Expansion connector | Timing input | For OUT2, non-voltage input |
| Reset input | ||
| Auto-zero input | ||
| Program switching input | Non-voltage input x 3 inputs | |
| Laser-Off input | For Head A/Head B, non-voltage input | |
| Comparator output | For OUT2, NPN open-collector output | |
| Alarm output | For OUT2, NPN open-collector output (N.C.) | |
| Binary | Binary output | Measured data output (21 bits), OUT1/OUT2 selectable, NPN open-collector output |
| Strobe output | NPN open-collector output | |
| Binary selector output | ||
| Binary selector input | Non-voltage input | |
| RS-232C interface | Measured data output and control input/output (Maximum baud rate: 115,200 bps, selectable) | |
| USB interface | In conformity with USB Revision 2.0 Full speed (USB1.1 compatible) | |
| Major functions | 2 OUT simultaneous measurement, Operation, Averaging, Filter, Calibration, Measurement, AUTO ZERO, Sampling frequency setting, Mutual interference prevention, Data storage, 8-program memory, ECO mode, ABLE setting, Target setting, ABLE tuning, Selection of measurement surface of transparent target, Statistics processing, Connection of setting support software, Selectable head-mounting, etc. | |
| Rating | Power voltage | 24 VDC ±10 %, Ripple (P-P) 10 % or less |
| Current consumption | When connecting one measurement head 500 mA or less / When connecting two measurement heads 600 mA or less | |
| Environmental resistance | Ambient temperature | 0 to +50 °C |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Weight | Approx. 370 g | |
| *1 The rating of the NPN open-collector: 50 mA max. (40 V max.), residual voltage of 1 V max. The rating of non-voltage input: 1 V or less ON voltage, 0.6 mA or less OFF current. *2 LK-G3001 can be operated singly. The measured value display and setting modifications can be performed on the display panel (LK-GD500) or via the setting support software (LK-H1W). |
