We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
NBN8-18GM50-E2-V1
Part number
084197
Type
Inductive sensor
Description
Inductive sensor NBN8-18GM50-E2-V1
Stock availability:
On request
If you are pursuing Pepperl+Fuchs NBN8-18GM50-E2-V1 084197, reach FAMAGA, the world's central company of factory-made equipment. Our company has operated for more than ten years - these are years of experience, which are outlined in the quality of outcomes and personalseparate attention to each orderer. We admire everyone, who cooperated with us - so, our regular customers pick up the most acceptable purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 4000 such purchasers, and we constantly form new agreements. More than 600 transactions are made per day, because FAMAGA operates all over the earth Germany, United Kingdom, El Salvador, South Africa, Comoros, Belarus, Romania, Tajikistan, Vietnam, Singapore, United Arab Emirates, Georgia, Latvia, Botswana, Thailand, Poland, Liberia, Netherlands, Croatia, Bosnia and Herzegovina, South Sudan, Ghana, Albania, Philippines, Ecuador, Burkina Faso, Argentina, Brunei, Nigeria, Togo, Guatemala, Angola, Dominica, Haiti, Djibouti, South Korea, Mauritania, Paraguay, Mauritius, Iceland, Morocco, Mali. A well-developed logistics network and a partnership network allow us to conduct our elements anywhere in the planet quickly without compromising product quality.
A specific source of repute for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the direction of manufacturing equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this amount is growing every day. We are proud that users choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as not to lower the bar.
To request or order, phone us or write to the online chat on our official website. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
General specifications | |
---|---|
Switching function | Normally open (NO) |
Output type | PNP |
Rated operating distance | 8 mm |
Installation | non-flush |
Output polarity | DC |
Assured operating distance | 0 ... 6.48 mm ( -25 ... 70 °C (-13 ... 158 °F) ) 0 ... 6.08 mm ( -40 ... -25 °C (-40 ... -13 °F) ) |
Reduction factor rAl | 0.5 |
Reduction factor rCu | 0.4 |
Reduction factor r304 | 0.7 |
Nominal ratings | |
Operating voltage | 10 ... 30 V |
Switching frequency | 0 ... 500 Hz |
Hysteresis | typ. 5% |
Reverse polarity protection | reverse polarity protected |
Short-circuit protection | pulsing |
Voltage drop | &le, 3 V |
Operating current | 0 ... 200 mA |
Off-state current | 0 ... 0.5 mA typ. 0.1 µ,A at 25 °C |
No-load supply current | &le, 18 mA |
Switching state indicator | Multihole-LED, yellow |
Functional safety related parameters | |
MTTFd | 1190 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Approvals and certificates | |
EAC conformity | TR CU 020/2011 |
UL approval | cULus Listed, General Purpose |
CSA approval | cCSAus Listed, General Purpose |
CCC approval | CCC approval / marking not required for products rated &le,36 V |
Ambient conditions | |
Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) |
Mechanical specifications | |
Connection type | Connector M12 x 1 , 4-pin |
Housing material | brass, nickel-plated |
Sensing face | PBT |
Housing diameter | 18 mm |
Degree of protection | IP67 |