We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
NBN40-U1-E2
Part number
194779
Type
Inductive sensor
Description
Inductive sensor NBN40-U1-E2
Stock availability:
On request
If you are questing Pepperl+Fuchs NBN40-U1-E2 194779, call FAMAGA, the world's top provider of industrialized equipment. Our company has functioned for more than ten years - these are cycles of experience, which are symbolized in the quality of products and special attention to each customer. We value everyone, who worked with us - so, our regular buyers get the most convenient purchase terms and discounts on the factory-made equipment market. Now, there are more than 4500 such buyers, and we constantly arrange new agreements. More than 600 agreements are achieved per day, because FAMAGA works all over the earth Germany, United Kingdom, Bolivia, Yemen, Syria, Mozambique, United Arab Emirates, Congo, Colombia, Djibouti, Luxembourg, Botswana, Namibia, Grenada, Serbia, Mongolia, Eritrea, Honduras, El Salvador, Netherlands, Japan, Brazil, Egypt, Liechtenstein, Thailand, Belarus, Kuwait, Albania, Lithuania, Suriname, Rwanda, Indonesia, Nicaragua, Georgia, United States, Qatar, Macedonia, Mexico, Kiribati, Jamaica, The Gambia, Cyprus, Zambia, Madagascar, Denmark. A well-elaborated logistics link and a partnership network help us to deliver our products anywhere in the earth immediately without damaging product quality.
A specific source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the sphere of manufacturing equipment.
All spare parts from FAMAGA are assured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been delivered, and this amount is amounting every day. We are glad that clients choose FAMAGA again and again, and we are glad to make more developed and technologically innovative industrial equipment so as to stay on the top.
To ask a question or make a request, call us by phone or send a message to the online chat on our site. You can also direct a list of the needful equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
General specifications | ||
---|---|---|
Switching function | Normally open (NO) | |
Output type | PNP | |
Rated operating distance | 40 mm | |
Installation | non-flush | |
Output polarity | DC | |
Assured operating distance | 0 ... 32.4 mm | |
Actual operating distance | 36 ... 44 mm | |
Reduction factor rAl | 0.31 | |
Reduction factor rCu | 0.3 | |
Reduction factor r304 | 0.74 | |
Reduction factor rBrass | 0.39 | |
Output type | 3-wire | |
Nominal ratings | ||
Operating voltage | 10 ... 30 V DC | |
Switching frequency | 0 ... 180 Hz | |
Hysteresis | typ. 5 % | |
Reverse polarity protection | reverse polarity protected | |
Short-circuit protection | pulsing | |
Voltage drop | &le, 2 V | |
Operating current | 0 ... 200 mA | |
Off-state current | 0 ... 0.5 mA typ. 0.01 mA | |
No-load supply current | &le, 20 mA | |
Time delay before availability | 80 ms | |
Operating voltage indicator | LED, green | |
Switching state indicator | LED, yellow | |
Functional safety related parameters | ||
MTTFd | 1510 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Compliance with standards and directives | ||
Standard conformity | ||
Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 | |
Approvals and certificates | ||
EAC conformity | TR CU 020/2011 | |
UL approval | cULus Listed, General Purpose | |
CCC approval | CCC approval / marking not required for products rated &le,36 V | |
Ambient conditions | ||
Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) | |
Mechanical specifications | ||
Connection type | screw terminals | |
Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % | |
Core cross-section | up to 2.5 mm2 | |
Minimum core cross-section | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 | |
Maximum core cross-section | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 | |
Housing material | PA/metal with epoxy powder coating | |
Sensing face | PA | |
Housing base | plastic | |
Degree of protection | IP68 / IP69K | |
Mass | 225 g | |
Note | Tightening torque: 1.8 Nm (housing) |