We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
NBB15-U1-E2-C
Part number
203008
Type
Inductive sensor
Description
Inductive sensor NBB15-U1-E2-C
Stock availability:
On request
If you are inspecting Pepperl+Fuchs NBB15-U1-E2-C 203008, contact FAMAGA, the world's top supplier of mechanized equipment. Our company has worked for more than ten years - these are cycles of experience, which are expressed in the quality of outputs and personalseparate attention to each orderer. We admire everyone, who cooperated with us - therefore, our regular buyers receive the most favorable purchase conditions and discounts on the machine made streamlined equipment market. At this time, there are more than 4500 such customers, and we constantly sign new agreements. More than 750 proceedings are resolved per day, because FAMAGA operates all over the earth Germany, United Kingdom, Nepal, Mauritius, Seychelles, Macedonia, Cambodia, Jamaica, Cameroon, Italy, Oman, China, Eritrea, Ukraine, Cyprus, Singapore, Morocco, Antigua and Barbuda, Sierra Leone, Comoros, Guinea, Suriname, Malaysia, Czech Republic, Jordan, The Gambia, Mozambique, South Korea, Nicaragua, Zimbabwe, Kenya, South Sudan, Turkmenistan, Georgia, Mauritania, Cape Verde, Zambia, Greece, Luxembourg, Ireland, Dominica, Benin, Bolivia, Eswatini, Djibouti, United States, Swaziland, Vietnam. A well-developed logistics network and a partnership network assist us to deliver our units anywhere in the earth promptly without discrediting product quality.
A special source of pride for FAMAGA is its staff members, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the direction of factory-made equipment.
All outcomes from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been provided, and this bulk is rising every day. We are glad that purchasers choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To ask a question or book, call us by phone or write to the online chat on our official website. You can also send a list of the needful equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
General specifications | ||
---|---|---|
Switching function | Normally open (NO) | |
Output type | PNP | |
Rated operating distance | 15 mm | |
Installation | flush | |
Output polarity | DC | |
Assured operating distance | 0 ... 12.15 mm | |
Actual operating distance | 13.5 ... 16.5 mm typ. 15 mm | |
Reduction factor rAl | 0.33 | |
Reduction factor rCu | 0.31 | |
Reduction factor r304 | 0.74 | |
Reduction factor rBrass | 0.41 | |
Output type | 3-wire | |
Nominal ratings | ||
Operating voltage | 10 ... 30 V | |
Switching frequency | 0 ... 4 Hz | |
Hysteresis | typ. 5 % | |
Reverse polarity protection | reverse polarity protected | |
Short-circuit protection | pulsing | |
Voltage drop | &le, 3 V | |
Operating current | 0 ... 200 mA | |
Off-state current | 0 ... 0.5 mA | |
No-load supply current | &le, 20 mA | |
Time delay before availability | 300 ms | |
Constant magnetic field | 150 mT | |
Alternating magnetic field | 150 mT | |
Operating voltage indicator | LED, green | |
Switching state indicator | LED, yellow | |
Functional safety related parameters | ||
MTTFd | 1420 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Compliance with standards and directives | ||
Standard conformity | ||
Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 | |
Approvals and certificates | ||
UL approval | cULus Listed, General Purpose | |
CCC approval | CCC approval / marking not required for products rated &le,36 V | |
Ambient conditions | ||
Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) | |
Mechanical specifications | ||
Connection type | screw terminals | |
Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % | |
Core cross-section | up to 2.5 mm2 | |
Minimum core cross-section | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 | |
Maximum core cross-section | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 | |
Housing material | PA/metal with epoxy powder coating | |
Sensing face | PA | |
Housing base | plastic | |
Degree of protection | IP68 / IP69K | |
Mass | 225 g | |
Note | Tightening torque: 1.8 Nm (housing) |