We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412007210
Description
Parts | Filter pressure regulator |
Condensate drain | fully automatic, open without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
Pressure gauge | with pressure gauge |
lockable | lockable |
Housing | Polyamide |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 5100 l/min |
Compressed air connection | G 1/2 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412007210, call FAMAGA, the world's leading retailer of industrial equipment. Our company has operated for more than ten years - these are ages of experience, which are illustrated in the quality of products and individual attention to each client. We cherish everyone, who cooperated with us - so, our regular consumers receive the most favorable purchase terms and discounts on the machine made streamlined equipment market. Now, there are more than 3500 such clients, and we constantly make new agreements. More than 700 proceedings are resolved per day, because FAMAGA works all over the globe Germany, United Kingdom, Bangladesh, Bahrain, Australia, Sweden, Cuba, Netherlands, Uzbekistan, Saudi Arabia, Equatorial Guinea, Syria, Argentina, Slovenia, Afghanistan, Liechtenstein, Burma, The Gambia, United States, Russia, Djibouti, Jamaica, South Korea, Mozambique, Panama, Zambia, Croatia, Cape Verde, Bulgaria, Jordan, South Sudan, Albania, Iran, Zimbabwe, Latvia, Central African Republic, Pakistan, Finland, Brunei, Benin, Sudan, Seychelles, Comoros, Costa Rica, Egypt. A well-developed logistics system and a partnership network help us to dispatch our units anywhere in the world with no delay without compromising product quality.
A specific source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only experts, who already have experience in the sphere of factory-made equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this number is increasing every day. We are pleased that buyers choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as stay in control.
To ask a question or order, contact us or send a message to the online chat on our official website. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 5100 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | See table |
Pressure supply | single |
Filter reservoir volume | 49 cm³ |
Filter element | exchangeable |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |
Filter insert | Polyethylene |